NEWS News
Hot Products / Hot Products
Contact us
联系我们
Phone: 027-8656 3216
Mailbox: baierchina807@163.com
Address: Metallurgical Avenue Qingshan District, Hubei Province, Torch Building 5F, No. 54
News 新闻详情

Hydraulic wrench in the board for the installation and maintenance of the role BAIER

Date: 2015-12-21
Views: 105

      Bayer hydraulic wrench to tighten the process is as follows: Assuming do install the device has eight fastening screws, and then after all the basic parts assembled, hydraulic quick coupling wrench inserted between the wrench and the front plate, in accordance with the locking , began to suppress.

 

Hydraulic wrench in the board for the installation and maintenance of the role is reflected in :
      1 , plate heat exchanger manufacturing production , the hydraulic wrench is an essential tool , simple to use , saving effort, the operation does not require a lot of space , greatly reducing the labor intensity and improve production efficiency and ensure the quality of the product, in pressed plywood and stainless steel plates sit nicely in the process of all of the parallel plate while advancing to ensure the board for tightness .
      2 , hydraulic wrenches for a plate change , whether it is newly installed or reinstalled open repair , hydraulic wrench how to ensure that all plates and plywood nicely squeezed together , the problem must be taken seriously operation .

      Bayer hydraulic wrench to tighten the process is as follows : Assuming do install the device has eight fastening screws, and then after all the basic parts assembled , hydraulic quick coupling wrench inserted between the wrench and the front plate , in accordance with the locking , began to suppress .

      Therefore, we should pay attention to the use of the following two hydraulic wrench (1, reaction rod to be placed in the right place , to ensure that the force 2 , wrench twist the lever to rotate the device specified range ) , the process should be watching the gauge pressure know torque force , after the end of the first fastening , pull to the other side of the valve , the pressure to zero , open the hydraulic fittings from the plate heat exchanger.

      Repeat the above steps , you can put on the plate with a hydraulic wrench tightening the screws well , to make a qualified product .

      Bayer will always be your best friend !

回到顶部
Copyright ©2005 - 2015 Baier
犀牛云提供企业云服务
Address: Metallurgical Avenue Qingshan District, Hubei Province, Torch Building 5F, No. 54
Tel: 86 027-86563119
Fax: 86 027-8656 3261
邮编:330520